PowerCable Modbus 101x

Code: 8594185580348
€149 / pcs €180,29 incl. VAT

Choose variant

NETIO PowerCable Modbus 101x is a smart WiFi power socket and a power extension cable designed by NETIO products. Using the Modbus/TCP protocol, it is possible to switch its power output on/off and read energy consumption remotely over the network.

Detailed information

Electrical socket type PWC: 101F (Type F, Schuko)
In stock (10 pcs) | 8594185580348
€149 / pcs
€180,29 incl. VAT
Electrical socket type PWC: 101E (Type E, FR)
In stock (10 pcs) | 8594185580331
€149 / pcs
€180,29 incl. VAT
Electrical socket type PWC: 101J (Type J, CH)
In stock (10 pcs) | 8594185580355
€149 / pcs
€180,29 incl. VAT
Electrical socket type PWC: 101S (IEC 320 C-14)
In stock (10 pcs) | 8594185580362
€149 / pcs
€180,29 incl. VAT

Product detailed description

PowerCable connects to the network over WiFi (internal antenna). The output power socket can be turned On/Off over a web interface. The web interface also shows the measured electrical values (V, A, kWh, W, Hz, TruePF) at the metered power socket.

  • WiFi connection, Auto-Reconnect
  • Modbus/TCP protocol, IP filter
  • Electrical measurements (V, A, W, kWh, TPF, Hz)
  • IOC – Output state independent on FW updates
  • ZCS – Zero-current switching

PowerCable Modbus 101x supports the M2M Modbus/TCP protocol for controlling its output and reading the measured values. Modbus/TCP is a popular M2M protocol used in the industry world-wide. To increase security, PowerCable Modbus contains a built-in IP filter. The IP filter limits the range of IP addresses that are allowed to access the device using the Modbus/TCP protocol.

The WiFi power cable supports IOC (Independent Output Control); the state of the output is not affected by weak WiFi signal, restart of the WiFi module, or even firmware upgrade. The power-up state of the smart power socket is configurable (On/Off/Last).

An important feature for industrial control is ZCS (Zero Current Switching). This feature ensures that the relay is switched only when the immediate current value passes through zero. This feature ensures long-term durability even when switching capacitive loads (switching supplies common in ICT) or inductive loads (transformers, motors).

The operating temperature range of NETIO PowerCable Modbus 101x is -10 to 65°C (at 65°C, the maximum current is limited to 5A).

Electrical measurements (readings accessible over Modbus/TCP and the web)

  • Current [A]
  • Voltage [V]
  • Consumption [kWh]
  • Output power [W]
  • TPF (True Power Factor)
  • Frequency [Hz]
  • Phase Angle [-180...180°]

No special mobile application is needed for installing the WiFi controlled outlet and connecting it to a WiFi network. PowerCable Modbus works as a WiFi AP and a web based wizard will guide you through the configuration, including the selection of a WiFi network from a list. The setup process is simple and fast.

 

Applications

NETIO PowerCable Modbus 101x, a smart WiFi power socket for lightweight industrial applications. It is an ideal solution for remote control and metering of 230V power sockets outside electrical cabinets.

The metered power socket can be controlled over the network from a PLC (industrial controller), a multimedia PC, or an industrial touchscreen control panel.

NETIO PowerCable Modbus 101x is a WiFi controlled outlet suitable for IoT and Industry 4.0 applications.

 

101x – The “x” denotes different types of plugs and sockets

PowerCable Modbus 101x is supplied in several versions depending on the electrical socket type (as used in different countries). All 101x models come with two 0,85m cables with the corresponding power socket and power plug types.

 

101x

Input

Output

Voltage / current

PowerCable Modbus 101F

Europlug

DE – Type F Schuko

230V / 16A

PowerCable Modbus 101E

Europlug

FR – Type E

230V / 16A

PowerCable Modbus 101J

CH – Type J

CH – Type J

230V / 10A

PowerCable Modbus 101S

IEC-320 C14

IEC-320 C13

110/230V 10A

 

For more information visit: https://www.netio-products.com/en/device/powercable-modbus-101x

Additional parameters

Category: NETIO power sockets
Warranty: 2 years
? Lua programmable: No
? Electricity measurement: Yes
? Network: Wi-Fi

The NETIO products company is a Czech producer of smart power sockets which can be controlled over LAN and WiFi.

Our products are programmable and support all common M2M API protocols

  • Our sockets are intended not just for end users (B2C) but mainly for businesses (B2B). A typical user is a system integrator that uses our products in various industrial projects. Our products can be found in demonstration booths, wind power plants, hospitals, and many other M2M and IoT applications.
  • We offer technical support, long-term compatibility and product stability to all companies that use our products in their projects or long-lived solutions. We are a European producer and we understand the needs of our customers.
  • Our NETIO 4x products offer unmatched customization possibilities via Lua scripts that run directly in the device. Thanks to this unique feature, the power sockets can be controlled by any third-party sensors on the network, without relying on a cloud or an Internet connection.

If you have any questions about our products, do not hesitate to ask us at info@netio.eu